Stainless steel screw pump structure features

Stainless steel screw pump structure features

G-type single-screw pump has strong self-priming ability and strong suction height; the screw pump has few parts, compact structure, small volume and simple maintenance. The rotor and stator are the wearing parts of the single-screw pump, and the structure is simple and easy to assemble and disassemble. It is a new type of pump that works according to the principle of twisting and meshing volume.
The main working components of the G-type single-screw pump are the eccentric screw (rotor) and the fixed bushing (stator). The use of non-toxic and tasteless edible rubber, the working temperature can reach 120 degrees Celsius, if the high temperature of 120 degrees Celsius - 350 degrees Celsius can be the same unit. Due to the special geometrical beginnings of the two parts, separate sealing chambers are formed. The medium is uniformly propelled by the axial flow. The internal flow rate is low and the volume remains the same. The pressure is stable and therefore does not vortex and agitate the product. The output pressure of each pump is 0.6MPa-1.2MPa, the lift is 60m-120m (clear water), and the self-priming height is generally above 3m. It can be used as a self-priming sewage pump.

We know that the development of the company is inseparable from your strong support. Grateful to the society, grateful to the consumers; low-key people, sincerely doing things. We are grateful to society, and it is the opportunity and environment that society has given us to survive and develop.